ControlAg Farm Automation
Cattle waiting behind a closed UpGate electric fence gateway

Automated Gate Opener for Cattle Farms

A cattle gateway needs to hold stock when closed and clear the full opening when the mob moves. UpGate® lifts electrified bungy cords overhead and stays open until you close it.

Automated Farm Gate for Dairy and Cattle Farms, UpGate® by ControlAg

Problems UpGate solves at a working gateway

Use one remote-controlled opening for the vehicles, machinery and cattle moving through your electric fence.

  • Repeated stops to open and close the same gateway
  • Drivers climbing out of the ute or tractor each time
  • No mains power available at an internal farm gateway
  • Vehicles and cattle needing to use the same opening
  • Limited clear ground for a gate to swing through
  • Different gateway widths and vehicle clearances

Send the gateway width, vehicle height and cord count. ControlAg can help you compare the right UpGate setup.

Check your gateway with ControlAg

Automated farm gates

Compare Standard and Large in single or double configurations.

View category

One gateway for the ute, machinery and cattle

UpGate is designed for cattle farms using electric fences. A single-sided system lifts from one post. Two UpGates can work from opposite sides for a wider opening, with each unit controlled independently.

  1. UpGate bungy cord electric fence connection

    Step 1

    Electric while closed

    The blue handle connects the bungy cord to the existing electric fence. On a double-sided system, only one side connects to the fence supply.

  2. Cattle moving near an UpGate farm gateway

    Step 2

    Open while the mob passes

    The gateway does not close on a timer. Leave the cords raised while cattle move, then close with the remote after the opening is clear.

  3. UpGate bungy cords across a cattle-farm gateway

    Step 3

    Visible and adjustable

    Closed cord heights can be adjusted, and the supplied yellow flag marks the highest cord so approaching drivers can see it.

5–47

operations a day

30–285

labour hours saved a year

2–19

months estimated payback

Based on ControlAg’s trial programme, one minute saved per operation, and labour calculated at $60 per hour. Actual results depend on farm use.

Is this a good fit for your gateway?

  • Cattle are trained to respect the connected electric fence
  • The gateway is away from public roads and unaware users
  • Warning signs are fitted where public footpaths, roads or boundaries are nearby
  • Animals are not allowed to play with, chew or rub against the gate
  • The opening is clear before either independent unit is moved
Remote control
Open or close with one press
Solar powered
4 to 6 hours of sun recommended
24 month
Parts-only warranty

Read the current UpGate manual before installation and operation. Site conditions, electric-fence compliance, vehicle clearance and weather all matter.

Download the manual

Questions before you choose

Can cattle and vehicles use the same opening?

Yes. With the cords raised, the opening is clear for vehicles or stock. Close the gateway with the remote after the last animal or vehicle has passed.

Does a double gateway move both sides together?

No. Each UpGate operates independently and uses its assigned remote button, so the operator controls both units separately.

How wide can the setup be?

The product range includes 7 m and 10 m bungy kits. Gateway suitability depends on the chosen single or double layout, posts, cord sag and site conditions.

Moving cattle and vehicles through the same gateway?

Send the opening width, post photos and the largest machine. ControlAg will help map the setup.

Ask about your gateway