ControlAg Farm Automation
Farm vehicle approaching an automatic UpGate gateway

Automatic Farm Gate Opener

Most automatic gate openers swing a steel gate. UpGate® lifts electrified bungy cords overhead, so cattle and vehicles can use the same internal farm gateway without a swing path.

Automated Farm Gate for Dairy and Cattle Farms, UpGate® by ControlAg

Problems UpGate solves at a working gateway

Use one remote-controlled opening for the vehicles, machinery and cattle moving through your electric fence.

  • Repeated stops to open and close the same gateway
  • Drivers climbing out of the ute or tractor each time
  • No mains power available at an internal farm gateway
  • Vehicles and cattle needing to use the same opening
  • Limited clear ground for a gate to swing through
  • Different gateway widths and vehicle clearances

Send the gateway width, vehicle height and cord count. ControlAg can help you compare the right UpGate setup.

Check your gateway with ControlAg

Automated farm gates

Compare Standard and Large in single or double configurations.

View category

Remove a repeated stop without changing how the farm is fenced

Trial farmers averaged 5 to 47 operations a day. At one minute saved per operation and labour at $60 per hour, that represented 30 to 285 hours a year and an estimated 2 to 19 month payback. Actual results depend on use.

  1. Farmer using an UpGate remote control

    Step 1

    Familiar one-button control

    Use the handheld remote like a garage-door remote. One press opens or closes, and a second press while moving reverses direction.

  2. Raised bungy cords on an UpGate track

    Step 2

    Built around existing fencing

    One to four bungy cords connect to the farm electric fence. Each cord has its own shuttle in the lifting track.

  3. Telehandler driving beneath an open UpGate

    Step 3

    Clearance for the actual machine

    Choose Standard for everyday vehicles or Large for taller machinery. Allow for cord sag, mounting height and uneven ground.

5–47

operations a day

30–285

labour hours saved a year

2–19

months estimated payback

Based on ControlAg’s trial programme, one minute saved per operation, and labour calculated at $60 per hour. Actual results depend on farm use.

Is this a good fit for your gateway?

  • An internal cattle-farm gateway, not a public-road installation
  • Vehicles can pass below 10 km/h with confirmed overhead clearance
  • The highest cord carries the supplied visibility flag
  • Single units for one side or two independently controlled units for wider openings
  • Maintenance can be completed at six-month and two-year intervals
Remote control
Open or close with one press
Solar powered
4 to 6 hours of sun recommended
24 month
Parts-only warranty

Read the current UpGate manual before installation and operation. Site conditions, electric-fence compliance, vehicle clearance and weather all matter.

Download the manual

Questions before you choose

Can it stay open while cattle move through?

Yes. UpGate does not close automatically, so it stays open until the assigned remote button is pressed again.

How many bungy cords can it lift?

The UpGate V1 supports 1 to 4 cords. Each cord needs one shuttle, and the manual notes that fewer cords operate faster.

What warranty is included?

The UpGate V1 includes a 24 month parts-only warranty for defects in materials and workmanship when installed and maintained to the manual. Labour, batteries, misuse and weather damage are excluded.

How many times do you stop at the same gate?

Tell us the daily traffic, gateway width and tallest vehicle. We will help you compare the practical options.

Ask about your gateway