ControlAg Farm Automation
Cattle moving through an automated farm gateway

UpGate compared with a cattle grid

A cattle grid stops you getting out of the ute, then the cattle still need a gate beside it. That second gate is the one you keep opening by hand.

Problems to solve before choosing a cattle grid

Compare the whole gateway job, including vehicle access, cattle movement, installation and usable width.

  • Vehicles and cattle needing the same opening
  • A second manual gate still interrupting the day
  • Limited space beside the existing gateway
  • Ground works and concrete increasing installation work
  • Wide gateways needing more than one grid
  • Cattle leg injury risk around an open grid

Send the gateway width, vehicle height and cord count. ControlAg can help you compare the right UpGate setup.

Ask about your gateway
UpGate installed on a working Australian farm

ControlAg builds UpGate for working farm gateways.

UpGate is a patented, solar-powered automated farm gate that lifts electrified bungy cords overhead. Farmers operate it from up to 100 metres away and use the same opening for vehicles and cattle.

What does a cattle grid actually solve?

A cattle grid only automates the gateway for vehicles. Cattle still need a manual gate beside it, and there is often no room for one.

Grids need level ground and specialist installation, and they carry a real injury risk if a cow puts a leg through.

What does each option cost?

A wide gateway usually needs two or three grids side by side, which can push the installed cost past $20,000.

Two UpGates give you a 15 metre wide automated gateway for $5,800 excluding GST, and both vehicles and cattle use the same opening.

  • Installs DIY in almost any spot
  • No ground works or concrete
  • No leg injury risk from a grid
  • Widen the gateway with a longer bungy cord

Where to next

Weighing up a grid for a wide gateway?

Send us the width and what moves through. We will compare it honestly against a grid.

Find your UpGate